• Every cartridge is inspected to ensure that it is functional prior to entering the recycling process.
• Complete disassembly of the cartridge. No cutting, burning or drilling holes in the cartridge.
• Thorough cleaning of the Dust bin, Photocopying drum, Magnetic roller and Master housing.
• Worn and damaged parts are replaced (see diagram)
• Toner release bin filled with high quality powder specifically matched with the drum.
• Complete reassembly of the cartridge.
• Post testing of each cartridge before shipping

• Refillers never change any of the above mentioned components.
• Refillers generally have no access to high quality engine specific powder and sometimes they use harsh photocopy powder, which
leads to premature fuser unit wear.
• Mid cycle failure is very common in refilling.
• Output is very low in a refilled cartridge. Our cartridges give same output as that of a OEM.
• Refilled cartridges generally leak, leading to printer damage. Our cartridges never leak.
  

Mentioned below in brief is the printing process:

In one of the stages the primary charge roller places a uniform negative DC bias voltage on the opc drum surface. The amount of the negative DC bias placed on the drum is controlled by the printers intensity setting. This process is called conditioning. Hence the need to change the primary charge roller every cycle to give a uniform negative DC bias. Non compliance of the above might lead to faulty printing

In another stage the laser beam is fired on to a rotating mirror called the scanner. As the mirror rotates, the beam reflects into a set of focusing lens. The beam then strikes the opc surface leaving a latent electrostatic image on the drum. The opc drum should be mint new, as otherwise image distortion would take place

In secondary stages the toner image is developed on the drum by the developing section which contains the toner particle. The toner is held to the magnetic roller sleeve by the stationery magnet inside the sleeve and the DC bias voltage supplied by the high voltage power supply. Critical to note here is that the toner powder used, should be of the highest quality for proper attraction by the magnetic sleeve. Also important to note is that the magnetic sleeve is to be replaced in all cycles due to its critical function of proper attraction of the toner powder.

In the waste bin section, the wiper blade performs the all important function of cleaning the opc drum. If the blade is not changed, it leads to flip overs and spills leading to dots over the printout and subsequent printer damage. Hence it is imperative to change the wiper blade very cycle.

Indian Banks would be glad to know that world class high quality recycled MICR LASER TONER cartridges, are now available off the shelf for almost all popular HP printers. The import of ready to use cartridges is a very expensive thing to do. We are proud to announce zero failure at clearings of cheques during MICR readings. The MICR toners offered by us use MICR powder imported from M/s. SCC Inc, USA.These cartridges cost almost half the cost of a USA made cartridge and it does not damage the printer.

Already banks and cheque printers are using our cartridges